100% full reservice 100% tunable
Direct replacement 100% bolt on installation. • 2.0 diameter shock...
This 4.5" diameter Billet Aluminum Overdrive Press-Fit 6 Rib Serpentine Pulley will fit Type II/TC/CBR/CBX power steering pumps with a 5/8 Inch driveshaft. This pulley will benefit 1990-2006 Jeep 4.0L applications to improve low engine RPM steering performance.
- chromoly tube- 32mm chromoly heat treated shaft- chromoly clamps- high pressure- aluminium anodised end caps- AN6 male fittings TIG welded- lightweight - fast- 8" or 10" travel available- 2.30" ID tube size - 0.45Liter of total volume- 3/4UNF internal thread at both sides
6.0 Inch DIA Single Grove V-Belt Power Steering Pump Pulley, Press-Fit Quality OEM replacement for most GMSB/BB, AMC 258/304, IH Scout engines equipped with a Saginaw P Pump with 0.750" driveshaft
Steering pump sportsman series TC 1300psi / 89 bars
Steering pump Race series type CBR external valve pressure 1650psi / 113bars (avalaible separatly)
Extra Capacity Remote Fluid Reservoir with External Spin-On Filter
heavy duty steering rod for Nissan Patrol Y60 build in aluminium 7075 rod ends chromoly right and left for easy set up
16" Single Pass Super Flow Heat Sink Fluid Cooler Kit
Steering control valve race serie 231cc
6.0 Inch DIA 6 Rib Serpentine Power Steering Pump Pulley, Press Fit Quality OEM replacement for most GMSB/BB/LS engines equipped with a Saginaw P Pump with 0.750" driveshaft
6.0 Inch DIA Dual Grove V- Belt Power Steering Pump Pulley, Press-Fit Quality OEM replacement for most GMSB/BB engines equipped with a Saginaw P Pump with 0.750"
This 5.5" diameter Billet Aluminum Overdrive Press-Fit 6 Rib Serpentine Pulley will fit Type II/TC/CBR/CBX power steering pumps with a 5/8 Inch driveshaft.
This 6.0" diameter Billet Aluminum Overdrive Press-Fit 6 Rib Serpentine Pulley will fit Type II/TC/CBR/CBX power steering pumps with a 5/8 Inch driveshaft.
This 6.0" diameter Billet Aluminum Overdrive Press-Fit TWO PIECE 6 Rib Serpentine Pulley will fit Type II/TC/CBR/CBX power steering pumps with a 5/8 Inch driveshaft.
8.75 Inch Overall Height3.5 Inch DiameterVented Reservoir CapBase features three (3) ports, from LEFT to RIGHT:Feed-To-PumpMain RETURNAuxiliary Port for Hydroboost Return if required
Dual Ended, Double Acting 2.75 Inch Bore X 8 Inch Stroke X 1.50 Inch Rod Diameter Welded One Piece Chromemoly Steel Rod Assembly 6AN Port Fittings Included Heavy Duty Wiper Seals to prevent contaminant damage and extend service life Durable Powder-coated Finish
Power Steering Puller, Installer, Fits 1 1/8 in, 1 1/4 in, 1 5/16 in., 1 3/8 in. Pulley Diameters, Set