Mule : Pro-FXT 820 Model : 24X Material: Aluminum Inspection: 100% X-ray...
Teryx : 750 /800* Model : 24X Material: Aluminum Inspection: 100% X-ray...
Brute Force : 750 4x4 Model : 24X Material: Aluminum Inspection: 100%...
Brute Force: 650l 4x4 Model : 24X Material: Aluminum Inspection: 100%...
Mule : 2500 / 3000 / 4010 Model : 24X Material: Aluminum Inspection:...
KingQuad : 450 / 700 / 75 Model : 24X Material: Aluminum Inspection:...
YXZ : 1000 Model : 24X Material: Aluminum Inspection: 100% X-ray...
Wolverine : Rmax / 4 1000 Model : 24X Material: Aluminum Inspection:...
Radiador for engine with scoop and twil spal 16" Overall sizes 40"x18"x3" Intel 1.25" outlet 1.5"
TRX : 420AT / 500AT Rancher Model : 24X Material: Aluminum Inspection: 100% X-ray inspected on the production line to ensure optimal quality and reliability. Accessories: Hub cap included, mounting system not provided. Load capacity: 12x7: up to 675 lb 12x8: up to 1,150 lb 14x7: up to 700 lb
Renegade : 500 / 570 / 650 / 800 / 850 / 1000 Model : 24X Material: Aluminum Inspection: 100% X-ray inspected on the production line to ensure optimal quality and reliability. Accessories: Hub cap included, mounting system not provided.) Load capacity: 12x7: up to 675 lb 12x8: up to 1,150 lb 14x7: up to 700 lb
TRX : 500 Foreman Rubicon Model : 24X Material: Aluminum Inspection: 100% X-ray inspected on the production line to ensure optimal quality and reliability. Accessories: Hub cap included, mounting system not provided. Load capacity: 12x7: up to 675 lb 12x8: up to 1,150 lb 14x7: up to 700 lb
Outlander : 330 / 400 / 500 / 570 / 650 / 800 / 850 / 1000 Model :24X Material: Aluminum Inspection: 100% X-ray inspected on the production line to ensure optimal quality and reliability. Accessories: Hub cap included, mounting system not provided. Load capacity : 12x7: up to 675 lb 12x8: up to 1,150 lb 14x7: up to 700 lb
heavy duty steering rod for Nissan Patrol Y60 build in aluminium 7075 rod ends chromoly right and left for easy set up
Mule : Pro-FXT 820 Model : 24X Material: Aluminum Inspection: 100% X-ray inspected on the production line to ensure optimal quality and reliability. Accessories: Hub cap included, mounting system not provided. Load capacity: 12x7: up to 675 lb 12x8: up to 1,150 lb 14x7: up to 700 lb
Maverick: Max 1000 Model : 24X Material: Aluminum Inspection: 100% X-ray inspected on the production line to ensure optimal quality and reliability. Accessories: Hub cap included, mounting system not provided. Load capacity: 14x7: up to 700 lb
Sold as a kit bold on 2.5" diameter Full sercising and tunable
complete bushing with screw tube and bush 2"diamter 3" long
Securely mount 2.0" diameter reservoir to fabricated chassis tubing with the use of heavy duty hose clamps and rubber stand offs.
Heavy duty bushing for Canam X3 Fit the standard arms and the WSR Offroad' one
Tshirt King Of France locked by ARB 100% coton 185g/m² Black with print on the front and back
UFORCE : 500 /600 /800 Model : 24X Material: Aluminum Inspection: 100% X-ray inspected on the production line to ensure optimal quality and reliability. Accessories: Hub cap included, mounting system not provided. Load capacity: 14x7: up to 700 lb
Wilwood’s Rotor Bolt kits contain bolts and hardware for mounting rotors specific hat or adapters.
Wilwood’s Tru-Bar balance bar system is now available in a Forward Swing mount pedal with a 7:1 ratio. Tru-Bar pedals utilize a fixed trunnion bearing in the pedal arm, with spherical rod-end bearing pushrod attachments. They provide ultimate precision, control, and adjustment of the brake bias on race prepped vehicles.
Wilwood handbrake lever assemblies provide a lightweight, high-leverage component for drift cars, drag race cars and rally cars or any application where hand-actuation of one or more brake calipers is employed. With a lightweight aluminum forged 11:1 ratio
Maverick X3 : All Model : 24X Material: Aluminum Inspection: 100% X-ray inspected on the production line to ensure optimal quality and reliability. Accessories: Hub cap included, mounting system not provided. Load capacity: 14x7: up to 700 lb
Jack lock, TURN YOUR PRO EAGLE JACK INTO A JACK STAND WITH THIS USER FRIENDLY TOOL. EXTENDS INTO PLACE WITH THE PUSH OF A LEVER, LOCKING YOUR JACK AT THE HEIGHT YOU NEED UNTIL IT IS REMOVED.
Car build or and renting for FIA race contact nicolas@wsroffroad.com
In Ø38mm out Ø40mm and thread 1" to fit Dash16 hoses FITTINGS NOT INCLUDED
Dual Ended, Double Acting 2.75 Inch Bore X 8 Inch Stroke X 1.50 Inch Rod Diameter Welded One Piece Chromemoly Steel Rod Assembly 6AN Port Fittings Included Heavy Duty Wiper Seals to prevent contaminant damage and extend service life Durable Powder-coated Finish
Sold as a kit bold on 2.5" diameter Full sercising and tunable
This Spidertrax Knuckle Hardware Kit comes with everything you need to completely rebuild an inner and outer Ultimate or Pro Series Knuckle (USK/CSK). For rebuilding a complete front end (two inner knuckles, two outer knuckles), you will need two of these kits.
Differentiel air locker ATOM nissan front 35 spline
Model : 24X Material: Aluminum Inspection: 100% X-ray inspected on the production line to ensure optimal quality and reliability. Accessories: Hub cap included, mounting system not provided. Load capacity: 14x7: up to 700 lb
100% bolt -on performance. Large 2.5” shock bodies increase fluid capacity for smoother, cooler running shocks. Factory tuned for optimal ride quality. Fully rebuildable, serviceable and tunable. Wide Range Compression Adjuster that allows for precise compression damping adjustment to further refine your ride quality.
Pioneer : 500 / 700 Model : 24X Material: Aluminum Inspection: 100% X-ray inspected on the production line to ensure optimal quality and reliability. Accessories: Hub cap included, mounting system not provided. Load capacity: 12x7: up to 675 lb 12x8: up to 1,150 lb 14x7: up to 700 lb
3rd member for Spidertrax housing STARTING PRICE Please send Email for estimate
Replacement floor jack extension (8") or long extension (15") for extra tall vehicles. 8" Extension adjusts from 5" to 8" Recommended for most off road vehicles.15" Extension adjusts from 10" to 15." Recommended for long travel trucks and buggies on large tires.
CFORCE : 500 /600 Model : 24X Material: Aluminum Inspection: 100% X-ray inspected on the production line to ensure optimal quality and reliability. Accessories: Hub cap included, mounting system not provided. Load capacity: 14x7: up to 700 lb
plug and play Rover V8 ECU. Already configurated for a Rover V8 4.6L , stock injectors, Kent cams 204 Free acces to modify the mapping
The Pyrotect Rugged Radios MIDAIR helmet is an SA2020 rated helmet perfectly designed for off-road, circle track, or kart racing. https://wsroffroad.com/fr/accueil/37-intercom-rugged.htmlhttps://wsroffroad.com/fr/accueil/216-filtre-a-air-pour-casque.html
ZFORCE : 500 / 800 /1000 Model : 24X Material: Aluminum Inspection: 100% X-ray inspected on the production line to ensure optimal quality and reliability. Accessories: Hub cap included, mounting system not provided. Load capacity: 14x7: up to 700 lb
The best IFS drivetrain deserves the best IFS axle shafts. Our 30 Series 45 Splined 300M Billet IFS Stub Shafts deliver on that need, building on the best IFS technology available today. Sold as an axle shaft pair, with retaining washer and bolt included.