Viewed products
Special KONI technology, tailored for...
Special KONI technology, tailored for...
This lightweight 1.8-pound unit is ideal for Sprint Cars, Midgets, Dirt Modifieds, or any application where the master cylinders must be mounted remotely from the pedal. This unit features a variable leverage, machined billet pivot arm that multiplies input force on average by 1.5:1 - a 5:1 pedal becomes 7.5:1, 6:1 becomes 9:1.
Wilwood’s Rotor Bolt kits contain bolts and hardware for mounting rotors specific hat or adapters.
Wilwood’s Tru-Bar balance bar system is now available in a Forward Swing mount pedal with a 7:1 ratio. Tru-Bar pedals utilize a fixed trunnion bearing in the pedal arm, with spherical rod-end bearing pushrod attachments. They provide ultimate precision, control, and adjustment of the brake bias on race prepped vehicles.
OFFROAD 12' RACE SERIES Straight Cable to Intercom Driver and Co-Driver
just the insert (without radio and intercom)
16" Single Pass Super Flow Heat Sink Fluid Cooler Kit
Steering control valve race serie 231cc
6.0 Inch DIA Dual Grove V- Belt Power Steering Pump Pulley, Press-Fit Quality OEM replacement for most GMSB/BB engines equipped with a Saginaw P Pump with 0.750"
6.0 Inch DIA 6 Rib Serpentine Power Steering Pump Pulley, Press Fit Quality OEM replacement for most GMSB/BB/LS engines equipped with a Saginaw P Pump with 0.750" driveshaft
This 5.5" diameter Billet Aluminum Overdrive Press-Fit 6 Rib Serpentine Pulley will fit Type II/TC/CBR/CBX power steering pumps with a 5/8 Inch driveshaft.
This 6.0" diameter Billet Aluminum Overdrive Press-Fit 6 Rib Serpentine Pulley will fit Type II/TC/CBR/CBX power steering pumps with a 5/8 Inch driveshaft.
This 6.0" diameter Billet Aluminum Overdrive Press-Fit TWO PIECE 6 Rib Serpentine Pulley will fit Type II/TC/CBR/CBX power steering pumps with a 5/8 Inch driveshaft.
8.75 Inch Overall Height3.5 Inch DiameterVented Reservoir CapBase features three (3) ports, from LEFT to RIGHT:Feed-To-PumpMain RETURNAuxiliary Port for Hydroboost Return if required
Wilwood’s new GS Compact Remote Master Cylinders are an all new rebuildable design featuring a high pressure die cast aluminum body with a protective e-coat finish. Remote cylinders feature a standard 7/16-20 threaded inlet. Internally, a refined return spring and piston assembly assures positive pressure control along with a quick and complete release.
The best IFS drivetrain deserves the best IFS axle shafts. Our 30 Series 45 Splined 300M Billet IFS Stub Shafts deliver on that need, building on the best IFS technology available today. Sold as an axle shaft pair, with retaining washer and bolt included.
Fuel Pressure Regulator, 535 Series Mini, Inline, Return Style, 25-90 psi, Billet Aluminum, Black Anodized.
Dual Ended, Double Acting 2.75 Inch Bore X 8 Inch Stroke X 1.50 Inch Rod Diameter Welded One Piece Chromemoly Steel Rod Assembly 6AN Port Fittings Included Heavy Duty Wiper Seals to prevent contaminant damage and extend service life Durable Powder-coated Finish
The best IFS drivetrain deserves the best IFS axle shafts. Our 30 Series 40 Splined 300M Billet IFS Stub Shafts deliver on that need, building on the best IFS technology available today. Sold as an axle shaft pair with retaining nut, designed specifically for Spidertrax 40 Splined Ultimate Unit Bearings.
While Ultimate Unit Bearings seem to last forever, at some point in their lifetime servicing the bearings will be necessary. When that time comes, you can now service your own bearings with this genuine Timken bearing pack.
This Spidertrax Knuckle Hardware Kit comes with everything you need to completely rebuild an inner and outer Ultimate or Pro Series Knuckle (USK/CSK). For rebuilding a complete front end (two inner knuckles, two outer knuckles), you will need two of these kits.
Power Steering Puller, Installer, Fits 1 1/8 in, 1 1/4 in, 1 5/16 in., 1 3/8 in. Pulley Diameters, Set
In Ø38mm out Ø40mm and thread 1" to fit Dash16 hoses FITTINGS NOT INCLUDED